Ten T10 194 LED wedge bulbs, 6000K white, laid out in a row

10-Pack T10 194 LED Bulbs, 6000K White Wedge Base 5730 SMD, 12V Replacement for Interior Dome, License Plate, Parking & Trunk Lights

$13.99
Skip to product information
Ten T10 194 LED wedge bulbs, 6000K white, laid out in a row

10-Pack T10 194 LED Bulbs, 6000K White Wedge Base 5730 SMD, 12V Replacement for Interior Dome, License Plate, Parking & Trunk Lights

$13.99

✓ FREE Standard Shipping on every order

✓ Ships from our US & overseas warehouses

✓ Questions? Contact us

In stock

Ten small wedge-base LEDs that replace the tired amber bulbs in your dome light, licence plate lamps, parking lights and trunk - one pack covers most of the car at once.

What you get

  • 10 x T10 wedge-base LED bulbs, 6000K white
  • Two 5730 SMD chips per bulb for a wider spread of light than a single-chip bulb
  • Packed in a bag; the set ships at 23 g

Where they fit

  • Direct replacement for T10 / T15 / 194 / 168 / 158 / 12256 / 12961 / 2821 / 825 / W5W wedge bulbs
  • Interior dome and map lights, reading lights, door and step lights, instrument illumination
  • Licence plate lamps, parking lights, side marker lights, trunk and cargo lights
  • Plug and play - pull the old bulb, push the new one in, no wiring changes

Specifications

  • Base: T10 wedge (W5W)
  • LED chip: 5730 SMD, 2 per bulb
  • Power: 1 W per bulb
  • Luminous flux: approx. 110 lm per bulb
  • Light colour: 6000K white
  • Voltage: DC 12V
  • Bulb size: 3.0 x 1.2 x 1.2 cm (1.18 x 0.47 x 0.47 in) each
  • Bulb weight: 2 g each
  • Pack size: 9 x 5.5 x 2 cm (3.54 x 2.17 x 0.79 in)

Fitting notes

  • White only - no colour options in this pack
  • Not CAN-bus error-free. On cars that monitor their bulbs you may see a bulb-out warning or indicator hyperflash; these are best used in interior, licence plate and parking fittings that are not monitored
  • For 12V vehicles only. Check the bulb you are replacing against the socket list above before ordering
  • LED retrofit bulbs are not DOT-approved as headlight replacements in the US
  • Switch the circuit off before changing bulbs and let a warm lamp housing cool down

You may also like