2-Pack 12V LED Spot Lights, Universal Auxiliary Work Lights with 18-25 mm Bar Clamp, White and Yellow Beam with Strobe Mode

For the light you need where the headlights do not reach — a work site, a trail, a dark driveway. This pair of compact projector spot lights runs from a 12–20 V feed and clamps onto a bar or tube from 18 to 25 mm: motorcycle and ATV handlebars, UTV cages, roof racks and light bars.

Beam options

• 6000K white high beam — long-range, crisp light for clear conditions.
• 3000K yellow low beam — cuts through rain, fog and dust with less glare back at you.
• Position and strobe modes — switch the lights off and back on to step through them.

Built for the outside

• 12W LED per unit in a sealed, weather-resistant housing rated IP67.
• Aluminium heatsink body — deep fins run the length of the housing to pull heat away from the chip.
• Stainless steel clamp bolt and adjustable bracket — tilt the light to the angle you need and lock it down.

Wiring

Three leads per light: yellow for the yellow beam, red for the white beam, black to ground. Cycle the power switch off and on to step through the position and strobe modes.

In the box

• 2 × LED spot lights
• 2 × bar clamps with stainless hardware

Before you order

• Requires a 12–20 V DC supply. This is an auxiliary light, not a plug-and-play replacement for a factory headlight housing.
• The clamp fits bars from 18 to 25 mm. Measure your bar or rack tube first.
• Unit body measures roughly 54 × 38 × 85 mm, plus the clamp.